Assembling The Servo Kit On Gopigo Raspberry Pi Robot - Business Office 3

- July 28, 2018
Today, I'm roofing Part 3, which is the assembly of the servo kit on the GoPiGo Robot Car. You tin sack depository fiscal establishment check out likewise the Body in addition to Brain Assembly - Part 1, the Functionality Test - Part 2Part 3 - Servo AssemblyUltrasonic Sensor Attachment - Part 4. The GoPiGo Servo Kit contains five screws, iv modest nuts/bolts, 1 large nut/bolt, 2 acrylic Ts, 1 acrylic foursquare body, iv plastic servo bits in addition to the servo itself.
After peeling off the protective newspaper from the acrylic pieces, it's a affair of attaching the servo to the acrylic pieces in addition to tightening it all together alongside the large nut in addition to bolt.   
   
The white plastic bits are attachments for the servo shaft that you lot tin sack utilisation yet you lot encounter fit. Simply house 1 of the bits onto the servo shaft in addition to secure it past times screwing a modest screw inwards the center
small screw inwards the center
Now, nosotros tin sack connect the servo trunk to the trunk of the GoPiGo Robot automobile past times attaching the servo plastic lip alongside 2 screws.
After fixing the servo to the GoPiGo body, nosotros tin sack straight off connect the servo to the iii metallic pins on the GoPiGo board. From left to right, the cable sequence is xanthous (data transfer), carmine (power) in addition to chocolate-brown (ground).
This completes Part 3 of the assembly of the Servo Kit to the GoPiGo Robot automobile for the operate of connecting the Ultrasonic sensor I volition live attaching on Part 4. However, inwards hereafter I volition desire to attach a Raspberry Pi photographic television camera in addition to other sensors similar a PIR Motion Sensor.
   
 

Start typing and press Enter to search